Arctic Cat DVX 400 2004 Service Manual page 120

5. Remove the hub assembly; then remove the disc
cover (2).
6. Remove the cotter pin and slotted nut securing the tie
rod end to the knuckle; then remove the tie rod end
from the knuckle.
7. Remove the brake hose clamp (1); then remove the
front bumper assembly (3).
SP367
8. Remove the shock absorber lower mounting cap
SP368
screw (4); then remove the arm assembly (5).
9. Remove the shock absorber; then remove the cotter
SP369
pins and nuts from the ball joints.
SP370
SP371
SP372
11