Arctic Cat DVX 400 2004 Service Manual page 70

5. Install the engine sprocket with drive chain noting
marking (A) on the sprocket; then apply red Loctite
#271 to the threads and tighten the cap screws to
specifications.
6. Install the engine coolant hose; then install the spacer
(1) with O-ring to the engine oil outlet pipe and
tighten the cap screws (2) securely.
7. Install the engine oil union bolt and tighten to speci-
fications.
SP272
8. Join the wiring connectors to the alternator lead wire
coupler (3) and the neutral start lead coupler (4); then
connect the starter cables.
9. Connect the reverse gear selector cable (6); then
SP273
install the cable bracket (5).
10. Install the clutch cable to the clutch actuator lever.
SP274A
11. Install the carburetor and tighten the clamps securely.
12. Install the spark plug cap, engine sprocket cover, oil
drain, tank, and breather hose; then install the gas
tank and body.
13. Fill the oil tank. See Section 2.
14. Fill the cooling system with the appropriate mix of
Arctic Cat anti-freeze and water. See Section 2.
15. See Section 2 for all adjustments.
SP276
SP277
SP278
41