Removing A 3.5-Inch Hard Drive Adapter From A 3.5-Inch Hot Swappable Hard Drive Carrier - Dell PowerEdge T330 Owner's Manual

Figure 35. Installing a 3.5-inch hard drive adapter into a hot swappable hard drive carrier
1. 3.5-inch hot swappable hard drive carrier
3. hard drive adapter
Next steps
Install the 3.5-inch hot swappable hard drive carrier into the system.
Related links
Installing a 2.5-inch hot swappable hard drive into a 3.5-inch hard drive adapter
Installing a hot swappable hard drive carrier

Removing a 3.5-inch hard drive adapter from a 3.5-inch hot swappable hard drive carrier

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the Phillips #2 screwdriver ready.
3. Remove the 3.5-inch hot swappable hard drive carrier from the system.
Steps
1. Remove the screws from the rails on the 3.5-inch hot swappable hard drive carrier.
2. Lift the 3.5-inch hard drive adapter out of the 3.5-inch hot swappable hard drive carrier.
Figure 36. Removing a 3.5 inch hard drive adapter from a hard drive carrier.
1. 3.5-inch hot swappable hard drive carrier
3. 3.5-inch hard drive adapter
Next steps
Remove the 2.5-inch hot swappable hard drive from a 3.5-inch hard drive adapter.
2. screw (5)
4. 2.5-inch hard drive
2. screw (5)
4. 2.5-inch hot swappable hard drive
79