Removing A 3.5-Inch Hard Drive Adapter From A 3.5-Inch Hot Swappable Hard Drive Carrier; Installing A 3.5-Inch Hard Drive Adapter Into The 3.5-Inch Hot Swappable Hard Drive Carrier - Dell PowerEdge R330 Owner's Manual

Hide thumbs Also See for PowerEdge R330:
Table of Contents

Advertisement

3.
2.5-inch hard drive
Next steps
Install the 3.5-inch adapter into the 3.5-inch hot swappable hard drive carrier.
Related links

Installing a 3.5-inch hard drive adapter into the 3.5-inch hot swappable hard drive carrier

Removing a 3.5-inch hard drive adapter from a 3.5-inch hot swappable hard drive carrier

Prerequisites
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Keep the Phillips #2 screwdriver ready.
3.
Remove the 3.5-inch hot swappable hard drive carrier from the system.
Steps
1.
Remove the screws from the rails on the 3.5-inch hot swappable hard drive carrier.
2.
Lift the 3.5-inch hard drive adapter out of the 3.5-inch hot swappable hard drive carrier.
Figure 42. Removing a 3.5 inch hard drive adapter from a hard drive carrier.
1.
3.5-inch hot swappable hard drive carrier
3.
3.5-inch hard drive adapter
Next steps
Remove the 2.5-inch hot swappable hard drive from a 3.5-inch hard drive adapter.
Related links
Removing a hot swappable hard drive carrier
Removing a 2.5-inch hot swappable hard drive from a 3.5-inch hard drive adapter
Installing a 3.5-inch hard drive adapter into the 3.5-inch hot swappable hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Keep the Phillips #2 screwdriver ready.
3.
Install the 2.5-inch hot swappable hard drive into the 3.5-inch hard drive adapter.
80
2.
screw (5)
4.
2.5-inch hot swappable hard drive

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge r230

Table of Contents