Figure 59. Installing the iDRAC port card
1.
iDRAC port
3.
iDRAC port card connector
5.
captive screw (2)
Next steps
1.
Reconnect all the cables to the iDRAC port card.
2.
Install the internal cooling fan.
3.
Install the cooling shroud.
4.
Follow the procedure listed in the After working inside your system section.
Related links
Removing the cooling shroud
Removing the internal cooling fan
Installing the internal cooling fan
Installing the cooling shroud
Internal dual SD module (optional)
The Internal Dual SD Module (IDSDM) card provides two SD card slots. This card offers the following features:
•
Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and provides redundancy.
NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the
information is replicated from one SD card to another.
2.
SD vFlash media card
4.
iDRAC port card holder
105