5.
screw
Next steps
1.
Install the iDRAC port card.
2.
Install the cooling shroud.
3.
Install the internal cooling fan.
4.
Follow the procedure listed in the After working inside your system section.
Related links
Removing the cooling shroud
Removing the internal cooling fan
Installing the optional iDRAC port card
Installing the internal cooling fan
Installing the cooling shroud
Installing the optional iDRAC port card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Keep the Phillips #2 screwdriver ready.
4.
Remove the cooling shroud.
5.
Remove the internal cooling fan.
Steps
1.
Align and insert the tabs on the iDRAC port card on the slots on the chassis wall.
2.
Insert the iDRAC port card into the connector on the system board.
3.
Tighten the screw to secure the iDRAC port card.
104