Installing A 2.5-Inch Hot Swappable Hard Drive Into A 3.5-Inch Hard Drive Adapter - Dell PowerEdge T330 Owner's Manual

Figure 33. Installing a hot swappable hard drive carrier
1. release button
3. hard drive carrier handle
Next steps
If removed, install the front bezel.
Related links
Installing a hot swappable hard drive into a hot swappable hard drive carrier
Installing the optional front bezel

Installing a 2.5-inch hot swappable hard drive into a 3.5-inch hard drive adapter

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the Phillips #2 screwdriver ready.
Steps
1. Align the screw holes on the 2.5-inch hot swappable hard drive with the screw holes on the 3.5-inch hard drive adapter.
2. Install the screws to secure the 2.5-inch hot swappable hard drive to the 3.5-inch hard drive adapter.
2. hard drive carrier
77