Removing An (Optional) Internal Sd Card - Dell PowerEdge T330 Owner's Manual

• Single card operation — single card operation is supported, but without redundancy.

Removing an (optional) internal SD card

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Locate the SD card slot on the internal dual SD module and press the card to release it from the slot.
NOTE: Temporarily label each SD card with its corresponding slot number before removal. Re-install the SD card(s)
into the corresponding slots.
2. Lift the SD card away from the internal dual SD module.
Figure 60. Removing internal SD card.
1. Internal Dual SD module
3. SD card 2
5. SD card slot 1
Next steps
1. Install an internal SD card.
2. Follow the procedure listed in the After working inside your system section.
Related links
Installing an (optional) internal SD card
106
2. SD card 1
4. SD card slot 2