Recommended Tools; Front Bezel (Optional); Installing The Optional Front Bezel - Dell PowerEdge T330 Owner's Manual

6. Turn on the system and any attached peripherals.
Related links
Installing the system cover

Installing the optional front bezel

Recommended tools

You need the following tools to perform the removal and installation procedures:
• Keys to the bezel lock
• Phillips #2 screwdriver
• Wrist strap
• Plastic scribe

Front bezel (optional)

The front bezel is attached to the front side of the system and prevents accidents while removing the hard drive or when pressing
the reset or power button. The front bezel can also be locked for additional security.
Installing the optional front bezel
1. Locate and remove the bezel keys.
NOTE: There are two bezel keys attached to the back of the bezel.
2. Press the release latch, and push the bezel toward the system until the bezel locks into place.
3. Lock the bezel by using the key.
Figure 12. Installing and removing the optional front bezel
1. release latch
54
2. system