Table of Contents
Advertisement
Figure 15. Installing the system feet
1.
slot (12)
3.
tab (12)
5.
system feet (4)
Next steps
Place the system upright on a flat and stable surface, and turn the system feet outward.
Related links
Removing the system feet
Removing the system feet
Caster wheels (optional)—tower mode
Caster wheels provide mobility to the system in the tower mode.
The caster wheel assembly consists of:
•
Caster wheel units (front and back)
•
Two screws for the caster wheel units
Installing caster wheels
Prerequisites
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Keep the Phillips #2 screwdriver ready.
3.
Place the system on its side on a flat and stable surface with the base of the system extending off the edge of the surface.
4.
If installed, remove the system feet.
2.
screw hole (4)
4.
base of the tower
6.
screw (4)
57
Advertisement
Table of Contents
Troubleshooting
