Installing A 3.5-Inch Hot Swappable Hard Drive Carrier Blank - Dell PowerEdge T330 Owner's Manual

Figure 28. Removing a 3.5-inch hot swappable hard drive carrier blank
1. hard drive carrier blank
Next steps
If removed, install the front bezel.
Related links
Removing the optional front bezel
Installing the optional front bezel

Installing a 3.5-inch hot swappable hard drive carrier blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that came with the product.
1. Follow the safety guidelines listed in Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive carrier blank into the hard drive slot, and push the hard drive carrier blank until the release button clicks
into place.
72
2. release button