Installing The System Board - Dell PowerEdge T330 Owner's Manual

Figure 93. Removing the system board
1. system board
3. system board t-handle post
Next steps
1. Install the system board.
2. Follow the procedure listed in the After working inside your system section.
Related links
Removing the cooling shroud
Removing memory modules
Removing the internal cooling fan
Removing an expansion card
Removing the heat sink
Removing the processor
Removing the optional iDRAC port card
Removing the optional internal dual SD module

Installing the system board

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
142
2. touch point (2)