Installing The Power Interposer Board - Dell PowerEdge T330 Owner's Manual

Figure 77. Removing the PIB
1. release latch
3. slots (4)
Next steps
1. Install the PIB.
2. Follow the procedure listed in the After working inside your system section.
Related links
Removing a redundant AC power supply unit
Removing the power supply unit blank
Removing the cooling shroud

Installing the power interposer board

Installing the power interposer board
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
Follow the safety guidelines listed in the Safety instructions section..
126
2. hooks (4)
4. PIB connector