Installing A Four-Slot Hard Drive Blank; System Memory - Dell PowerEdge T330 Owner's Manual

Installing a four-slot hard drive blank

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Locate the hard drive slots numbered from four to seven.
2. Insert the four-slot hard drive blank into the hard drive slot, and push it until the release tabs click into place.
Figure 44. Installing the four-slot hard drive blank
1. four-slot hard drive blank
Next steps
1. Install the x8 hard drive backplane.
2. Install all hard drives.
3. Install the cooling shroud.
4. Follow the procedure listed in the After working inside your system section.
Related links
Installing a hot swappable hard drive carrier
Installing the hard drive backplane
Installing the cooling shroud

System memory

Your system supports DDR4 ECC unbuffered DIMMs (RDIMMs).
NOTE: MT/s indicates memory module speed in Mega Transfers per second.
2. release tab (4)
87