Removing A 3.5-Inch Hard Drive Adapter From A 3.5-Inch Hot Swappable Hard Drive Carrier - Dell DSS 2500 Owner's Manual

Figure 25. Removing a 2.5-inch hard drive from a 3.5-inch hard drive adapter
1 3.5-inch hard drive adapter
3 2.5-inch hard drive
Next step
Install a 2.5-inch hard drive into a 3.5-inch hard drive adapter.
Related links

Removing a 3.5-inch hard drive adapter from a 3.5-inch hot swappable hard drive carrier

Safety instructions
Removing a 3.5-inch hard drive adapter from a 3.5-inch hot
swappable hard drive carrier
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Keep the Phillips #2 screwdriver ready.
3 Remove the 3.5-inch hot swappable hard drive carrier from the system.
Steps
1 Remove the screws from the rails on the 3.5-inch hot swappable hard drive carrier.
2 Lift the 3.5-inch hard drive adapter out of the 3.5-inch hot swappable hard drive carrier.
Next step
Remove the 2.5-inch hot swappable hard drive from a 3.5-inch hard drive adapter.
Related links
Safety instructions
Removing a hot swappable hard drive carrier
74 Installing and removing system components
2 screw (2)