Table of Contents
Advertisement
7.
socket
Next steps
NOTE: Ensure that you install the heat sink after you install the processor. The heat sink is necessary to maintain proper
thermal conditions.
1.
Install the heat sink.
2.
Follow the procedure listed in
3.
While booting, press F2 to enter System Setup and check that the processor information matches the new system
configuration.
4.
Run the system diagnostics to verify that the new processor operates correctly.
Related links
Removing the cooling shroud
Installing the cooling shroud
Removing the processor
Removing the cooling shroud
Installing the heat sink
Installing the cooling shroud
Installing the heat sink
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell
certified service technicians.
1.
Ensure that you follow the
2.
Keep the Phillips #2 screwdriver ready.
3.
Follow the procedure listed in
4.
Remove the cooling shroud.
5.
Install the processor.
Steps
1.
If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint free cloth.
2.
Use the thermal grease syringe included with your processor kit to apply the grease in a thin spiral on the top of the processor
as shown in the following figure.
CAUTION: Applying too much thermal grease can result in excess grease coming in contact with and contaminating
the processor socket.
NOTE: The thermal grease syringe is intended for one-time use only. Dispose of the syringe after you use it.
After working inside your
Safety
instructions.
Before working inside your
system.
system.
115
Advertisement
Table of Contents
Troubleshooting
