Stabilize The Rack - Oracle SPARC T7-4 Installation Manual
Hide thumbs
Also See for SPARC T7-4:
- Service manual (208 pages) ,
- Safety and compliance manual (106 pages)
Table of Contents
Advertisement
Stabilize the Rack
Stabilize the Rack
Caution -
devices before installing the server.
Refer to the rack documentation for detailed instructions for the following steps.
1.
Read the rack cautions and stabilize the rack.
See
"Rack Cautions" on page
2.
Open and remove the front and rear doors from the rack.
3.
To prevent the rack from tipping during the installation, stabilize the rack using
all antitilt mechanisms provided.
4.
If there are leveling feet beneath the rack to prevent it from rolling, extend these
leveling feet fully downward to the floor.
5.
Install the rackmount kit.
See
"Installing the Rackmount Kit" on page
Related Information
"Installing the Rackmount Kit" on page 33
■
32
SPARC T7-4 Server Installation Guide • March 2017
To reduce the risk of personal injury, stabilize the rack by extending all antitilt
30.
33.
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T7-4 and is the answer not in the manual?
Questions and answers