Oracle SPARC T7-4 Installation Manual page 69

In Oracle ILOM 3.1, the name space for /SYS was replaced with /System. You can use
Note -
the legacy name in a command at any time, but to expose the legacy name in the output, you
must enable it with ->
Oracle ILOM 3.1 documentation.
3. (Optional) Redirect the host output to display on the serial terminal device.
-> start /HOST/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started.
. . .
4. (Optional) You can execute other Oracle ILOM commands while the server
initializes.
a. To display the Oracle ILOM prompt, press the #. (Hash+Dot) keys.
b. To see information about available Oracle ILOM commands, type:
To see information about a specific command, type help command-name
c. To return to displaying host output from the server initialization, type:
-> start /HOST/console
5. Continue with the installation by installing the OS.
See "Configure the Preinstalled OS" on page
Related Information
"Connect the SER MGT Cable" on page 59
■
"Oracle ILOM System Console" on page 70
■
"Configure the Preinstalled OS" on page 71
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 71
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 73
■
set /SP/cli legacy_targets=enabled
71.
Power on the Server for the First Time
. For more information, see the
Powering On the Server for the First Time
help
69