Oracle SPARC T7-4 Installation Manual page 48

Install the Top Rear Shipping Braces
1. Install two cage nuts into the left rear rack post above the adapter bracket.
Position the top left shipping brace on the left rear rack post above the adapter.
2.
Insert and finger-tighten the guide pin in the appropriate hole for your server.
3.
Secure the brace with two M6 x 12-mm screws.
4.
5. Repeat
Related Information
"Determine Correct Shipping Brace Fasteners" on page 47
■
"Install the Bottom Rear Shipping Brace" on page 49
■
48 SPARC T7-4 Server Installation Guide • March 2017
Step 1 through Step 4 for the top right shipping brace.