Reach A State To Install A Fresh Os (Oracle Ilom Web Interface) - Oracle SPARC T7-4 Installation Manual

boot
boot net
boot cdrom
boot disk1:h
boot tape
boot disk myunix -as
dload <filename> ( addr -- )
Examples:
4000 dload /export/root/foo/test
?go - if executable program, execute it
Related Information
"Configure the Preinstalled OS" on page 71
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 71
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 73
■
"Assign a Static IP Address to the NET MGT Port" on page 78
■
Reach a State to Install a Fresh OS (Oracle ILOM
Web Interface)
If you do not plan to use the preinstalled OS, use this procedure to prevent the server from
booting from the preinstalled OS.
1. Prepare the appropriate boot media according to your installation method.
There are many methods by which you can install the OS. For example, you can boot and install
the OS from DVD media or from another server on the network. For more information, refer to
Installing Oracle Solaris 11 Systems, comparing installation options at:
http://www.oracle.com/goto/Solaris11/docs
2. If you have not done so, perform these tasks to access the Oracle ILOM web
interface on the server:
a. In a browser on the same network as the system, type the IP address of the
SPM.
b. Log in to Oracle ILOM by typing your user name and password.

Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)

- boot kernel from default device.
Factory default is to boot
from DISK if present, otherwise from NET.
- boot kernel from network
- boot kernel from CD-ROM
- boot from disk1 partition h
- boot default file from tape
- boot myunix from disk with flags "-as"
debug load of file over network at address
or if Forth program, compile it
Powering On the Server for the First Time 73