Installing The Rackmount Kit; Rackmount Kit Overview - Oracle SPARC T7-4 Installation Manual

Rack documentation
■
SPARC T7-4 Server Safety and Compliance Guide
■
"Rack Compatibility" on page 30
■
"Rack Cautions" on page 30
■

Installing the Rackmount Kit

These topics describe how to install the rackmount hardware.
"Rackmount Kit Overview" on page 33
■
"Determine Correct Rackmount Hardware" on page 35
■
"Mark the Rackmounting Location" on page 36
■
"Install the Shelf Rails" on page 37
■
Related Information
"Rack Compatibility" on page 30
■
"Tools Needed for Installation" on page 26
■
"Determine Correct Rackmount Hardware" on page 35
■
"Install the Shelf Rails" on page 37
■

Rackmount Kit Overview

The rackmount kit has two shelf rail assemblies, one for each side of the rack. Each shelf rail is
marked LEFT or RIGHT.
The shelf rails are mounted to the rack with four brackets, two on each side. Brackets for
square-hole racks are preattached to the shelf rails. The rackmount kit also includes a set of
brackets for use with threaded-hole racks.
The shelf rails adjust to fit rack depths from 25 to 34.25 in. (63.5 to 87 cm).
In addition, the rackmount kit includes the shipping brace components. Installing the shipping
brace components is optional.
Installing the Rackmount Kit
Installing the Server 33