Before You Begin; Wall-Mount Components - Cisco DX650 Administration Manual

Before You Begin

You need these tools to install the bracket:
• No. 1 and No. 2 Phillips screwdrivers
• Level
You must also install an Ethernet jack for the telephone in the desired location if an Ethernet jack does not
currently exist. This jack must be wired for an Ethernet connection. You cannot use a regular telephone jack.
For more information about phone installation requirements and warnings, see
Experience Installation, on page

Wall-Mount Components

Figure 1: Wall-Mount Kit for Single-Phone Assembly
1 Six 8-18 x 1.25 inch Phillips-head screws
2 Six anchors
3 Four 3 x 6mm machine screws
4 One phone bracket
The hardware that is included in this wall-mount kit is for drywall installation. For installation onto other
Note
surfaces, such as brick or concrete, you must provide your own hardware.
47.
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
Install Cisco Desktop Collaboration Experience
Cisco Desktop Collaboration
5 One wall bracket
6 One 6-inch Ethernet cable
7 One lock-down key
8 One lock
61