Chapter 2: Installing Your Phone; Before You Begin - Cisco SPA525G User Manual

Installing Your Phone

Before You Begin

SPA525G (SPCP) User Guide
This chapter describes how to install and connect your Cisco SPA525G IP Phone.
It contains the following sections:
•
Before You Begin, page 20
•
Connecting the Handset, page 21
•
(Optional) Attaching the Desk Stand, page 23
•
(Optional) Mounting the Phone to the Wall, page 24
•
Connecting Your Phone's Power, page 27
•
Connecting Your Phone to the Computer Network, page 28
•
Verifying Phone Startup, page 36
Before you install and connect your phone, verify with your System Administrator
(if applicable) that the network is ready for the phone, read the safety notices, and
make sure you have all the phone parts and documentation available.
!
NOTE: The RJ-11 port marked "AUX" is not for
use as a telephone line port.
CAUTION: Do not plug a telephone line cord
into the port marked "AUX."
2
20