Cisco DX650 Administration Manual page 83

If you are using an external power supply, plug the power cord into the phone.
Figure 4: Attach Cables
1 Handset port
2 Phone bracket
3 Network port
Step 4 To attach the phone to the wall bracket, insert the tabs on the top of the phone bracket into the slots on the
wall bracket. Ensure that the power cord and any other cable that does not terminate in the wall behind the
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
Install Cisco Desktop Collaboration Experience
4 Wall bracket
5 AC adapter port
6 Power cable
65