Cisco DX650 Administration Manual page 209

Desktop collaboration experience video conferencing
Hide thumbs Also See for DX650:
Table of Contents

Advertisement

The following table describes the items in the Streaming Statistics areas.
Table 47: Streaming Statistics Area Items
Item
Remote Address
Local Address
Start Time
Stream Status
Host Name
Sender Packets
Sender Octets
Sender Codec
Sender Reports Sent (see note)
Sender Report Time Sent (see note)
Rcvr Lost Packets
Avg Jitter
Rcvr Codec
Rcvr Reports Sent (see note)
Rcvr Report Time Sent (see note)
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
Description
IP address and UDP port of the destination of the stream.
IP address and UDP port of Cisco Desktop Collaboration Experience.
Internal time stamp indicating when Cisco Unified Communications
Manager requested that Cisco Desktop Collaboration Experience start
transmitting packets.
Indication of whether streaming is active or not.
Unique, fixed name that is automatically assigned to Cisco Desktop
Collaboration Experience based on its MAC address.
Total number of RTP data packets transmitted by Cisco Desktop
Collaboration Experience since starting this connection. The value is 0
if the connection is set to Receive Only.
Total number of payload octets transmitted in RTP data packets by
Cisco Desktop Collaboration Experience since starting this connection.
The value is 0 if the connection is set to Receive Only.
Type of audio encoding used for the transmitted stream.
Number of times the RTCP Sender Report has been sent.
Internal time stamp indication when the last RTCP Sender Report was
sent.
Total number of RTP data packets that have been lost since starting
receiving data on this connection. Defined as the number of expected
packets less the number of packets received, where the number of
received packets includes any that are late or duplicate. The value
displays as 0 if the connection was set to Send Only.
Estimate of mean deviation of the RTP data packet inter-arrival time,
measured in milliseconds. The value displays as 0 if the connection was
set to Send Only.
Type of audio encoding used for the received stream.
Number of times the RTCP Receiver Reports have been sent.
Internal time stamp indication when a RTCP Receiver Report was sent.
Streaming Statistics
191

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents