User Voice Messaging System Access - Cisco DX650 Administration Manual

for your end users. You must provide as much information as possible to ensure that they can successfully
access and use the User Options web pages.
Make sure to provide end users with the following information about the User Options web pages:
• The URL required to access the application. This URL is:
• A user ID and default password are needed to access the application.
• A brief description of what a web-based, graphical user interface application is, and how to access it
• An overview of the tasks that users can accomplish by using the web page.

User Voice Messaging System Access

Cisco Unified Communications Manager lets you integrate with many different voice messaging systems,
including the Cisco Unified Communications Manager voice messaging system. Because you can integrate
with a variety of systems, you must provide users with information about how to use your specific system.
Provide this information to each user:
• How to access the voice messaging system account.
• Initial password for accessing the voice messaging system.
• How Cisco Desktop Collaboration Experience indicates that voice messages are waiting.
• Make sure that you have used Cisco Unified Communications Manager to set up a message waiting
http://<server_name:portnumber>/ccmuser/, where
the web server is installed.
These settings correspond to the values you entered when you added the user to Cisco Unified
Communications Manager (see
with a web browser.
Note Make sure that you have used Cisco Unified Communications Manager to configure
the Primary and Backup Voice Mail Server.
Make sure that you have configured a default voice messaging system password for all users.
indicator (MWI) method.
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
Reset Options and Load Upgrades, on page
User Voice Messaging System Access
is the host on which
server_name
148).
209