Cisco DX650 Administration Manual page 125

Option Description
SW port speed Speed and duplex of the Network port. Valid
values:
• Auto Negotiate
• 10 Half - 10-BaseT/half duplex
• 10 Full - 10-BaseT/full duplex
• 100 Half - 100-BaseT/half duplex
• 100 Full - 100-BaseT/full duplex
• 1000 Full - 1000-BaseT/full duplex
If Cisco Desktop Collaboration Experience is
connected to a switch, configure the port on the
switch to the same speed/duplex as Cisco Desktop
Collaboration Experience, or configure both to
autonegotiate.
If you change the setting of this option, you must
change the PC Port Configuration option to the
same setting.
PC port speed Speed and duplex of the Computer (access) port.
Valid values:
• Auto Negotiate
• 10 Half - 10-BaseT/half duplex
• 10 Full - 10-BaseT/full duplex
• 100 Half - 100-BaseT/half duplex
• 100 Full - 100-BaseT/full duplex
• 1000 Full - 1000-BaseT/full duplex
If Cisco Desktop Collaboration Experience is
connected to a switch, configure the port on the
switch to the same speed/duplex as the Cisco
Desktop Collaboration Experience, table or
configure both to autonegotiate.
If you change the setting of this option, you must
change the SW Port Configuration option to the
same setting.
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
Wireless and Networks Settings Menu
To change
1 Select SW port speed to
display options.
2 Select the setting that you
want.
3 Tap the selection.
1 Select PC port speed to
display options.
2 Select the setting that you
want.
3 Tap the selection.
To configure the setting on
multiple Cisco Desktop
Collaboration Experience devices
simultaneously, enable the Remote
Port Configuration in the
Enterprise Phone Configuration
(System > Enterprise Phone
Configuration).
If the ports are configured
Note
for Remote Port
Configuration in Cisco
Unified Communications
Manager, you cannot
change the data on the
Cisco Desktop
Collaboration Experience
device.
107