Tftp Server Settings Menu - Cisco DX650 Administration Manual

Wireless and Networks Settings Menu
• Visibility timeout: Set the amount of time before the Bluetooth device visibility times out (2 minutes,
5 minutes, 1 hour, or never)
• Show received files: Displays files that have been received.

TFTP Server Settings Menu

The TFTP server settings menu allow you to set up and manage TFTP server information. The following table
describes these options and, where applicable, explains how to change them.
Table 24: TFTP Server Settings Menu
Option
TFTP server settings
Use alternate TFTP
server
TFTP server 1
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
104
Description
Indicates whether Cisco Desktop
Collaboration Experience is using an
alternative TFTP server.
Primary TFTP server used by Cisco
Desktop Collaboration Experience. If
you are not using DHCP in your network
and you want to change this server, you
must use the TFTP server 1 option.
If you enable the Alternate TFTP option,
you must enter a nonzero value for the
TFTP server 1 option.
To select or change
Tap Use Alternate TFTP Server to
enable or disable.
If an administrator is deploying
Note
VPN for use with Cisco Desktop
Collaboration Experience
endpoint, the alternate TFTP
server setting must be checked
and the TFTP server 1 setting
must be set to the correct TFTP
server. Doing so ensures that the
Cisco Desktop Collaboration
Experience endpoint continues to
register to the appropriate server
when connected to a noncorporate
network.
1 Tap Use alternate TFTP server to
enable.
2 Select TFTP server 1.
3 Enter a new TFTP server IP address.
4 Tap OK.