Installing Your Phone
Before You Begin
NOTE
!
CAUTION
Cisco Small Business IP Phone SPA 525G/SPA 525G2 (SPCP) User Guide
This chapter describes how to install and connect your Cisco SPA 525G/525G2 IP
Phone. It contains the following sections:
•
Before You Begin, page 20
•
Connecting the Handset, page 21
•
(Optional) Attaching the Desk Stand, page 23
•
(Optional) Mounting the Phone to the Wall, page 24
•
Connecting Your Phone's Power, page 26
•
Connecting Your Phone to the Computer Network, page 27
•
Verifying Phone Startup, page 35
Before you install and connect your phone, verify with your System Administrator
(if applicable) that the network is ready for the phone, read the safety notices, and
make sure you have all the phone parts and documentation available.
The RJ-11 port marked "AUX" is reserved for connection the Cisco SPA 500S
Attendant Console that works with the Cisco SPA 525G/525G2. It is not for use as
a telephone line port.
Do not plug a telephone line cord into the port marked "AUX."
2
20