Install Bracket - Cisco DX650 Administration Manual

Install Cisco Desktop Collaboration Experience

Install Bracket

Follow this procedure to install the phone on the wall.
Procedure
Step 1 Mount the wall bracket in the desired location. You can install the bracket over an Ethernet jack, or you can
run the Ethernet network cable to a nearby jack.
a) Use the level to ensure that the bracket is level, then use a pencil to mark the screw holes.
b) Carefully center the anchor over the pencil mark and use a no. 2 Phillips screwdriver to press the anchor
into the wall.
c) Screw the anchor clockwise into the wall until the anchor is seated flush.
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
62