Cisco DX650 Administration Manual page 136

Telephony Features Available
Feature
Hold/Resume
Ignore
Message Waiting
Indicator
Music On Hold
Mute
Plus Dialing
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
118
Description
Allows the user to move a connected call
from an active state to a held state.
To place a call on hold, tap the Hold button.
To resume a call, choose the line with the
held call and tap the Hold button.
Allows a user to ignore an incoming call
from the notification window.
A light on the media station handset that
indicates that a user has one or more new
voice messages.
Plays music while callers are on hold.
Mutes the audio input for all input devices
including, Bluetooth and 3.5 mm handsets,
media station and device speakers, and
headset.
Allows the user to dial E.164 numbers
prefixed with a + sign.
To dial the + sign, the user needs to press
and hold the * key for at least 1 second. This
applies to dialing the first digit for an
on-hook or off-hook call only.
Configuration reference
Requires no configuration, unless you
want to use music on hold. See
Music-on-Hold in this table for
information.
No configuration is required.
For more information see:
• Cisco Unified Communications
Manager Administration Guide,
Message Waiting Configuration
chapter.
• Cisco Unified Communications
Manager System Guide,
Mail Connectivity to Cisco Unified
Communications Manager
For more information see the
Hold chapter in the Cisco Unified
Communications Manager Features and
Services Guide.
Requires no configuration.
Requires no configuration.
Voice
chapter.
Music On