Cisco DX650 Administration Manual page 48

Cisco Desktop Collaboration Experience Deployment
• External power supply
Note
For more information, see
Step 2 Assemble the phone, adjust phone placement, and connect the network cable. If you are using the Cisco
Desktop Collaboration Experience DX600 series phone in a WLAN environment, see Step 5.
This step locates and installs the phone in the network. For more information, see
Collaboration Experience, on page
Step 3 Monitor the phone startup process. This step adds primary and secondary directory numbers and features that
are associated with directory numbers to the phone, and verifies that the phone is configured properly.
For more information, see
Step 4 If you choose to deploy the Cisco Desktop Collaboration Experience DX600 series phone on a wireless
network, skip to Step 5.
If you are configuring the Ethernet network settings on the phone for an IP network, you can set up an IP
address for the phone either by using DHCP or by manually entering an IP address. For more information,
see Network Settings, on page
Step 5 If you choose to deploy the Cisco Desktop Collaboration Experience DX600 series device on the wireless
network, you must perform the following:
• Configure the wireless network.
• Enable wireless LAN for phones on Cisco Unified Communications Manager Administration.
• Configure a wireless network profile on the phone.
Note
For more information, see
Step 6 Make calls with the Cisco Desktop Collaboration Experience DX600 series phone to verify that the phone
and features work correctly.
See the Cisco Desktop Collaboration Experience DX600 Series User Guide.
Step 7
Provide information to end users about how to use their phones and how to configure their phone options.
For more information, see
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
30
The Cisco Desktop Collaboration Experience DX600 series phone requires an external power supply
when it is used in a WLAN environment.
Cisco Desktop Collaboration Experience Power, on page
59.
Phone Startup Verification, on page
67, and
The wireless LAN on the phone does not activate when Ethernet cables are connected on the phone.
VoIP Wireless Network, on page
Internal Support Website, on page 207
67.
Ethernet Settings Menu, on page
73.
33.
Install Cisco Desktop
105.