Application Setup - Cisco DX650 Administration Manual

Step 8 Configure and subscribe the phone and user device profile to Cisco Extension Mobility. Summary steps
include
• Subscribe the phone and the user device profile to Cisco Extension Mobility.
• Choose Device > Phone and click Add New.
• On the Phone Configuration window, in Extension Information, check Enable Extension Mobility.
• In the Log Out Profile drop-down list box, choose Use Current Device Settings or a specific configured
profile and click Save.
• To subscribe Cisco Extension Mobility to the phone, go to the Related Links drop-down list box in the
upper, right corner of the window and choose Subscribe/Unsubscribe Services; then, click Go.
Step 9
To allow a Cisco Extension Mobility end user to change the user PIN on the phone, configure the Change
Credential phone service and associate the user, the user device profile, or the phone with the Change Credential
phone service.
Step 10 In the Product Specific Configuration Layout portion of the Device Configuration window for a Cisco DX600
Series phone, select the Enabled value for the Multi-User drop-down list box.
Step 11 To change the default URL of the extension mobility server or to change from the default HTTPS URL to
HTTP, enter the new extension mobility server URL in the Multi-User URL field.

Application Setup

Cisco Desktop Collaboration Experience users can download applications to customize and extend the
capabilities of the device. Applications are available from Google Play. Cisco Unified Communications
Manager Administration provides access to applications through configuration of the following parameters
(in the Product Specific Configuration window):
• Allow Applications from Unknown Sources: Controls the ability of user to install applications from
sources other than Google Play.
• Allow Applications from Google Play: Controls the ability of user to install applications from Google
Play.
• Enable Cisco UCM App Client: Controls the ability of administrator to push applications from Cisco
Unified Communications Manager.
UCM App is the client on the device that can be used to subscribe or unsubscribe Android applications
that are created on Cisco Unified Communications Manager. This client provides the same functionality
as subscribing or unsubscribing Android applications from Cisco Unified Communications Manager,
but adds the convenience of doing so from the device.
Use these procedures to perform the required configuration:
Enable Cisco UCM App Client, on page 144
Create End User to Log in to UCM App, on page 144
Subscribe User with UCM App, on page 144
For best performance and deployment of applications provisioned through Cisco Unified Communications
Manager, Cisco recommends that you specify the versionCode when you create a service. If versionCode is
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
Configure Product-Specific Options
143