Telnet Command: Wan Mvlan - Draytek vigor2760 series User Manual

> wan lb status
WAN1: on
WAN2: on
WAN3: on
WAN4: on
WAN5: on
T e l n e t C o m m
T e l n e t C o m m
This command allows you to configure multi-VLAN for WAN and LAN. It supports pure
bridge mode (modem mode) between Ethernet WAN and LAN port 2~4.
wan mvlan [pvc_no/status/save/enable/disable] [on/off/clear/tag tag_no] [service type/vlan
priority] [px ... ]
S y n t a x
S y n t a x
Parameter
pvc_no
status
save
enable/disable
on/off
clear
tag tag_no
service type
vlan priority
px
E x a m p
E x a m p
PVC 7 will map to LAN port 2/3/4 in bridge mode;, service type is Normal. No tag added.
> wan mvlan 7 on 0 p2 p3 p4
PVC Bridge
-----------------------------------------------------------------
7
>
Vigor2760 Series User's Guide
a n d : w a n m v l a n
a n d : w a n m v l a n
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means index number of PVC. There are 8 PVC (0,
Channel-1, to 7, Channel-8) allowed to be configured.
However, only 2 to 7 are available for configuration.
It means to display the whole Bridge status.
It means to save the configuration into flash of Vigor router.
It means to enable/disable the Multi-VLAN function.
It means to turn on/off bridge mode for the specific channel.
It means to clear
It means to tag a number for the VLAN.
-1: No need to add tag number.
1-4095: Available setting numbers used as tagged number.
It means to specify the service type for VLAN.
0: Normal.
1: IGMP.
It means to specify the priority for the VALN setting.
Range is from 0 to 7.
It means LAN port. Available setting number is from 2 to 4.
Port number 1 is locked for NAT usage.
l e
l e
p1 p2
ON 0 1
Service Type Tag
Normal 0(OFF)
592
Priority
0