Draytek vigor2760 series User Manual page 131

WAN Connection
Detection
Bridge Mode
After finished the above settings, click OK to save the settings.
Such function allows you to verify whether network
connection is alive or not through Ping Detect.
Mode – Choose Always On or Ping Detect for the system
to execute for WAN detection. Always On means no
detection will be executed. The network connection will be
on always.

Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.

TTL (Time to Live) –If you choose Ping Detect as
detection mode, you have to type TTL value.
Enable Bridge Mode - If the function is enabled, the router
will work as a bridge modem.
Bridge Subnet – Make a bridge between the selected LAN
subnet and such WAN interface.
115 Vigor2760 Series User's Guide