Telnet Command: Sys Diag_Log - Draytek vigor2760 series User Manual

regser
licera
licifno
lic_wiz [set/reg/qry]
dev_chg
dev_key
E x a m p
E x a m p
> sys license licifno
License and Signature download interface setting:
licifno [AUTO/WAN#]
Ex: licifno wan1
Download interface is "auto-selected" now.
T e l n e t C o m m
T e l n e t C o m m
This command is used for RD debug.
sys diag_log [status| enable| disable| flush| lineno [w] | level [x] | feature [on|off] [y]| log]
S y n t a x
S y n t a x
Parameter
status
enable
disable
flush
lineno [w]
level[x]
feature [on/off]
log
E x a m p
E x a m p
Vigor2760 Series User's Guide
It means the license register server setting.
It means to erase license setting.
It means license and signature download interface setting.
It means the license wizard setting.
qry: query service support status
set [idx] [trial] [service type] [sp_id] [start_date] [License
Key]
reg: register service in portal
It means to change the device key.
It means to show device key.
l e
l e
a n d : s y s d i a g _ l o
a n d : s y s d i a g _ l o
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to show the status of diagnostic log.
It means to enable the function of diag_log.
It means to disenable the function of diag_log.
It means the flush log buffer.
It means the total lines for displaying message.
w - Available value ranges from 100 to 50000.
It determines the level of data displayed.
x – Available value ranges from 0 to 12. The larger the
number is, the detailed the data is displayed.
It is used to specify the function of the log. Supported
features include SYS and DSL (Case-Insensitive). Default
setting is "on" for "DSL".
It means the dump log buffer.
l e
l e
g
g
568