Telnet Command: Wan Mvlan - Draytek Vigor2860 Series User Manual

> wan lb status
WAN1: on
WAN2: on
WAN3: on
WAN4: on
WAN5: on
WAN6: on
WAN7: on
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows you to configure multi-VLAN for WAN and LAN. It supports pure
bridge mode (modem mode) between Ethernet WAN and LAN port 2~4.
wan mvlan [pvc_no/status/save/enable/disable] [on/off/clear/tag tag_no] [service type/vlan
priority] [px ... ][ Keep Tag]
S y n t a x D e
S y n t a x D e
Parameter
pvc_no
status
save
enable/disable
on/off
clear
tag tag_no
service type
: w a n m v l a n
: w a n m v l a n
s c r i p t i o n
s c r i p t i o n
Description
It means index number of PVC. There are 10 PVC,
0(Channel-1) to 9(Channel-9) allowed to be configured.
However, only 2 to 9 are available for configuration.
It means to display the whole Bridge status.
It means to save the configuration into flash of Vigor
router.
It means to enable/disable the Multi-VLAN function.
It means to turn on/off bridge mode for the specific
channel.
It means to turn off/clear the port.
It means to tag a number for the VLAN.
-1: No need to add tag number.
1-4095: Available setting numbers used as tagged
number.
It means to specify the service type for VLAN.
0: Normal.
1: IGMP.
753
Vigor2860 Series User's Guide