Telnet Command: Ip6 Dhcp Client - Draytek vigor2760 series User Manual

[<command>
<parameter>|...]
-a
-s
-S
-d
-D
-n
-i
-I
-p
-P
-b
-B
-r
Parameter
E x a m p
E x a m p
> ip6 dhcp req_opt WAN2 -S 1
> ip6 dhcp req_opt WAN2 -r 1
> ip6 dhcp req_opt WAN2 -a
% Interface WAN2 is set to request following DHCPv6 options:
%
>
T e l n e t C o m m
T e l n e t C o m m
This command allows you to use DHCPv6 protocol to obtain IPv6 address from server.
ip6 dhcp client [WAN1|WAN2|iface#] [-<command> <parameter>| ... ]
S y n t a x
S y n t a x
Parameter
client
[<command>
<parameter>|...]
-a
-p [IAID]
Vigor2760 Series User's Guide
The available commands with parameters are listed below.
[...] means that you can type in several commands in one
line.
It means to show current DHCPv6 status.
It means to ask the SIP.
It means to ask the SIP name.
It means to ask the DNS setting.
It means to ask the DNS name.
It means to ask NTP.
It means to ask NIS.
It means to ask NIS name.
It means to ask NISP.
It means to ask NISP name.
It means to ask BCMCS.
It means to ask BCMCS name.
It means to ask refresh time.
1: the parameter related to the request will be displayed.
0: the parameter related to the request will not be displayed.
l e
l e
sip name
a n d : i p 6 d h c p c l
a n d : i p 6 d h c p c l
D e s c r i p t i o n
D e s c r i p t i o n
i e n t
i e n t
Description
It means the dhcp client settings.
The available commands with parameters are listed below.
[...] means that you can type in several commands in one
line.
It means to show current DHCPv6 status.
It means to request identity association ID for Prefix
Delegation.
492