Draytek vigor2760 series User Manual page 19

Wireless AP (n model)
VoIP (V model)
Firmware Updates
Firmware updates for your product ensure that you have the latest set of features, security
updates and improvements for your product.
Please note that if your Vigor 2760 product has firmware version 1.x.x or earlier then it can
only update to later 1.x.x firmware. If your Vigor 2760 has firmware version 3.7.5 or later
('Delight/DrayOS' hardware) then you can upgrade to any compatible later firmware. You
cannot use Delight/DrayOS firmware on original (classic) Vigor 2760 hardware or vice-versa.
This manual applies only to DrayOS/Delight hardware/firmware.
Flow Monitor
Built-in Diagnostic Function
E-mail/SMS Alert
SNMP v1/v2c
TR-069 (Compliance with VigorACS SI)
Support 2T2R 2.4GHz, Single Band
IEEE802.11n Compliant
64/128-bit WEP, WPA/WPA2
WDS (Wireless Distribution System)
MAC Address Access Control
WPS
Wireless Client List
Access Point Discovery
Hidden SSID
Multiple SSID
WMM
Protocol: SIP, RTP/RTCP
6 SIP Registrars
G.168 Line Echo-cancellation
VoIP Status
PSTN Loop Through
Codec Features :

G.711 A/μ law

G.723.1

G.726

G.729 A/B

VAD/CNG
DTMF Relay :

In Band

Out Band (RFC-2833)

SIP Info
FAX/Modem Support :

G.711 Pass-through

T.38 for fax Sending/Receiving
Supplemental Services :

Call Hold/Retrieve

Call Waiting

CLIR (Calling Line Identification Restriction)

Call Forwarding (Always, Busy and No Answer)

Call Barring (Incoming / Outgoing)

Hotline

DND (Do Not Disturb)

Call Transfer

MWI (Message Waiting Indicator) (RFC-3842)
3 Vigor2760 Series User's Guide