Draytek vigor2760 series User Manual page 139

Open Port-based Bridge
Connection for this
Channel
Open WAN Interface for
this Channel
ISP Access Setup for
PPPoE/PPPoA Client
VCI - Type in the value provided by your ISP.
Protocol - Select a proper protocol for this channel.
Encapsulation - Choose a proper type for this channel. The
types will be different according to the protocol setting that
you choose.
Add VLAN Header – Check the box to enable the
following two options.
VLAN Tag – Type the value as the VLAN ID number.
Valid settings are in the range from 1 to 4095. The network
traffic flowing on each channel will be identified by the
system via their VLAN Tags. Channels using the same
WAN type may not configure the same VLAN tag value.
Priority – Choose the number to determine the packet
priority for such VLAN. The range is from 0 to 7.
The settings here will create a bridge between the LAN
ports selected and the WAN. The WAN interface of the
bridge connection will be built upon the WAN type selected
using the VLAN tag configured.
Physical Members – Group the physical ports by checking
the corresponding check box(es) for applying the port-based
bridge connection.
Check the box to enable relating function.
WAN Application –

Management – It can be specified for general
management (Web configuration/telnet/TR069). If
you choose Management, the configuration for this
VLAN will be effective for Web
configuration/telnet/TR069.

IPTV - The IPTV configuration will allow the WAN
interface to send IGMP packets to IPTV servers.

VoIP - The VoIP configuration will allow the WAN
interface to send VoIP packets to servers.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
ISP Name – Type in the name of your ISP.
Username – Type in the username provided by ISP in this
field. The maximum length of the name you can set is 80
characters.
Password – Type in the password provided by ISP in this
field. The maximum length of the password you can set is
48 characters.
PPP Authentication – Select PAP only or PAP or CHAP
for PPP.
Always On – Check it to keep the network connection
123 Vigor2760 Series User's Guide