Table of Contents
Advertisement
5
.
3
.
1
E
n
a
b
5
.
3
.
1
E
n
a
b
The Vigor 2620 router uses the P2 port to connect to an Ethernet based Internet
connection. In its default state, the P2 port operates as a standard LAN port and the
WAN2 (Ethernet WAN) options cannot be selected in the router's web interface.
To enable the router's Ethernet WAN port on port P2 instead of LAN mode:
1. Go to [WAN] > [General Setup] and click WAN2
2. In its default state, the Enable option is set to No, which allows the P2 port to be
used as a standard LAN port.
3. Set the Enable option for WAN2 to Yes, this enables the other options on this
page.
Set the Active Mode to Always On to make the Ethernet port the active Internet
connection.
4. Click OK to apply the change and the router will prompt to restart. Click OK to
restart the router.
l
i
n
g
t
h
e
E
t
h
e
l
i
n
g
t
h
e
E
t
h
e
r
n
e
t
W
A
N
P
o
r
n
e
t
W
A
N
P
o
22
r
t
r
t
- Quick Links:
- Vigor2620L
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2620 Series and is the answer not in the manual?
Questions and answers