Draytek vigor2760 series User Manual page 500

ifno
-e
E x a m p
E x a m p
> ip wanrip ?
Valid ex:ip wanrip <ifno> -e <0/1>
<ifno> 1: WAN1,2: WAN2
-e <0/1> 0: disable, 1: enable
Now status:
WAN[1] Rip Protocol disable
WAN[2] Rip Protocol disable
WAN[3] Rip Protocol disable
WAN[4] Rip Protocol disable
WAN[5] Rip Protocol disable
> ip wanrip 5 -e 1
> ip wanrip ?
Valid ex:ip wanrip <ifno> -e <0/1>
<ifno> 1: WAN1,2: WAN2
-e <0/1> 0: disable, 1: enable
Now status:
WAN[1] Rip Protocol disable
WAN[2] Rip Protocol disable
WAN[3] Rip Protocol disable
WAN[4] Rip Protocol disable
WAN[5] Rip Protocol enable
>
Vigor2760 Series User's Guide
It means the connection interface.
1: WAN1,2: WAN2, 3: PVC3,4: PVC4,5: PVC5
Note: PVC3 ~PVC5 are virtual WANs.
It means to disable or enable RIP setting for specified WAN
interface.
1: Enable the function of setting RIP of WAN IP.
0: Disable the function.
l e
l e
3: PVC3,4: PVC4,5: PVC5
3: PVC3,4: PVC4,5: PVC5
484