Telnet Command: Wl Config - Draytek vigor2760 series User Manual

----------Enable Mac Address Filter---------
ssid1: dis
----------MAC Address Filter----------
Index Attribute
0
1
s: Isolate the station from LAN
>
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows users to configure general settings and security settings for wireless
connection.
wl config mode [value]
wl config mode show
wl config channel [number]
wl config preamble [enable]
wl config txburst [enable]
wl config ssid [ssid_num enable ssid_name [hidden_ssid]]
wl config security [SSID_NUMBER] [mode]
wl config ratectl [ssid_num enable upload download ]
wl config isolate [ssid_num lan member]
S y n t a x D e
S y n t a x D e
Parameter
mode[value]
mode show
channel [number]
preamble [enable]
ssid2: dis
MAC Address
00:50:70:ff:12:70
s 00:50:70:ff:12:70
: w l c o n f i g
: w l c o n f i g
s c r i p t i o n
s c r i p t i o n
Description
It means to select connection mode for wireless connection.
Available settings are: "11bgn", "11gn", "11n", "11bg",
"11g", or "11b".
It means to display what the current wireless mode is.
It means the channel of frequency of the wireless LAN.
The available settings are 0,1,2,3,4,5,6,7,8,9,10,11,12 and 13.
number=0, means Auto
number=1, means Channel 1
....
number=13, means Channel 13.
It means to define the length of the sync field in an 802.11
packet.
Most modern wireless network uses short preamble with 56
bit sync field instead of long preamble with 128 bit sync
field. However, some original 11b wireless network devices
only support long preamble.
0: disable to use long preamble.
1: enable to use long preamble.
ssid3: dis ssid4: dis
Associated SSIDs
ssid1 ssid2 ssid3 ssid4
ssid1 ssid2
595 Vigor2760 Series User's Guide