Draytek vigor2760 series User Manual page 596

dialto
ltype
oname
opwd
pauth
ovj
okey
ometh
sch
ikemode
ikeid
For Dial-In Settings
itype
peer
Vigor2760 Series User's Guide
It means Server IP/Host Name for VPN (such as draytek.com
or 123.45.67.89).
It means Link Type.
"ltype=0" means "Disable".
"ltype=1" means "64kbps".
"ltype=2" means "128kbps".
"ltype=3" means "BOD".
It means Dial-Out Username.
"oname=admin" means to set Username = admin.
It means Dial-Out Password
"opwd=1234" means to set Password = 1234.
It means PPP Authentication.
"pauth=pc" means to set PPP Authentication = PAP&CHAP.
"pauth=p" means to set PPP Authentication = PAP Only
It means VJ Compression.
"ovj=on/off" means to enable/disable VJ Compression.
It means IKE Pre-Shared Key.
"okey=abcd" means to set IKE Pre-Shared Key = abcd.
It means IPSec Security Method.
"ometh=ah/" means AH.
"ometh=espd/espda/" means ESP DES without/with
Authentication.
"ometh=esp3/esp3a/" means ESP 3DES without/with
Authentication.
"ometh=espa/espaa" means ESP AES without/with
Authentication.
It means Index(1-15) in Schedule Setup.
sch=1,3,5,7 Set schedule 1->3->5->7
It means IKE phase 1 mode.
"ikemode=m" means IKE phase 1 mode = Main mode
"ikemode=a"means IKE phase 1 mode = Aggressive mode
It means KE Local ID.
"ikeid=vigor" means Set Local ID = vigor.
It means Allowed Dial-In Type. Available settings include:
"itype=t" means PPTP.
"itype=s" means IPSec.
"itype=L1"means L2TP (None).
"itype=L1" means L2TP(Nice to Have).
It means specify Peer VPN Server IP for Remote VPN
Gateway.
Type "203.12.23.48" means to allow VPN dial-in with IP
580