Draytek vigor2760 series User Manual page 101

MTU
PPP/MP Setup
IP Address Assignment
Method (IPCP)
D e t a i l s P a g e f o r S
D e t a i l s P a g e f o r S
MPoA is a specification that enables ATM services to be integrated with existing LANs,
which use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow
different LANs to send packets to each other via an ATM backbone.
TTL value is set by telnet command.
It means Max Transmit Unit for packet.
PPP Authentication – Select PAP only or PAP or CHAP
for PPP.
Usually ISP dynamically assigns IP address to you each
time you connect to it and request. In some case, your ISP
provides service to always assign you the same IP address
whenever you request. In this case, you can fill in this IP
address in the Fixed IP field. Please contact your ISP before
you want to use this function.
WAN IP Alias - If you have multiple public IP addresses
and would like to utilize them on the WAN interface, please
use WAN IP Alias. You can set up to 8 public IP addresses
other than the current one you are using.
Fixed IP – Click Yes to use this function and type in a
fixed IP address in the box of Fixed IP Address.
Default MAC Address – You can use Default MAC
Address or specify another MAC address by typing on the
boxes of MAC Address for the router.
Specify a MAC Address – Type the MAC address for the
router manually.
t a t i c o r D y n a m i c I
t a t i c o r D y n a m i c I
85
P i n W A N 1 ( P h y s i
P i n W A N 1 ( P h y s i
c a l M o d e : V D S L 2 )
c a l M o d e : V D S L 2 )
Vigor2760 Series User's Guide