Draytek vigor2760 series User Manual page 317

High speed vdsl2 router

Hide thumbs Also See for vigor2760 series:

Table of Contents

Ring Pattern

Prefer Codec

Voice Active Detector

After finishing all the settings here, please click OK to save the configuration.

Set Phone 1 and/or Phone 2 as the default ring port(s) for

this SIP account.

Choose a ring tone type for the VoIP phone call.

Select one of five codecs as the default for your VoIP calls.

The codec used for each call will be negotiated with the

peer party before each session, and so may not be your

default choice. The default codec is G.729A/B; it occupies

little bandwidth while maintaining good voice quality.

If your upstream speed is only 64Kbps, do not use G.711

codec. It is better for you to have at least 256Kbps upstream

if you would like to use G.711.

Single Codec – If the box is checked, only the selected

Codec will be applied.

The amount of data contained in a single packet. The

default value is 20 ms, which means the data packet will

contain 20 ms voice information.

This function can detect if the voice on both sides is active

or not. If not, the router will do something to save the

bandwidth for other using. Click On to invoke this function;

click off to close the function.

Vigor2760 Series User's Guide