Draytek vigor2760 series User Manual page 96

W A N 2
W A N 2
The physical LAN4 port can be treated as a WAN interface, named WAN2.
When WAN2 is enabled, WAN1 (DSL) will be disabled automatically.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Physical Type
VLAN Tag insertion
Vigor2760 Series User's Guide
w i t h E t h e r n e t
w i t h E t h e r n e t
WAN1
WAN3
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
You can change the physical type for WAN2 or choose
Auto negotiation for determined by the system.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The
range is form 0 to 4095.
Priority – Type the packet priority number for such VLAN.
80
WAN2