Draytek vigor2760 series User Manual page 99

High speed vdsl2 router

Hide thumbs Also See for vigor2760 series:

Table of Contents

according to the access mode that you choose in WAN

Note that Details Page will be changed slightly based on

ADSL/VDSL2 physical mode specified on

WAN>>General Setup.

This button will open different web page (based on Physical

Mode) to setup IPv6 Internet Access Mode for WAN

If IPv6 service is active on this WAN interface, the color of

"IPv6" will become green.

This button allows you to configure DHCP client options.

DHCP packets can be processed by adding option number

and data information when such function is enabled and

Enable/Disable – Enable/Disable the function of DHCP

Option. Each DHCP option is composed by an option

number with data. For example,

Option number:100

When such function is enabled, the specified values for

DHCP option will be seen in DHCP reply packets.

Interface – Specify the WAN interface(s) that will be

overwritten by such function. WAN4 ~ WAN6 can be

located under WAN>>Multi-PVC.

Option Number – Type a number for such function.

If you choose to configure option 61 here, the

detailed settings in WAN>>Interface Access will be

overwritten.

DataType – Choose the type (ASCII or Hex) for the data to

Data – Type the content of the data to be processed by the

function of DHCP option.

Vigor2760 Series User's Guide