Access Control - Draytek vigor2760 series User Manual

High speed vdsl2 router

Hide thumbs Also See for vigor2760 series:

Table of Contents

In the Access Control, the router may restrict wireless access to certain wireless clients only

by locking their MAC address into a black or white list. The user may block wireless clients

by inserting their MAC addresses into a black list, or only let them be able to connect by

inserting their MAC addresses into a white list.

In the Access Control web page, users may configure the white/black list modes used by

each SSID and the MAC addresses applied to their lists.

Available settings are explained as follows:

Enable Mac Address

MAC Address Filter

Client's MAC Address

Select to enable the MAC Address filter for wireless LAN

identified with SSID 1 to 4 respectively. All the clients

(expressed by MAC addresses) listed in the box can be

grouped under different wireless LAN. For example, they

can be grouped under SSID 1 and SSID 2 at the same time

if you check SSID 1 and SSID 2.

Display all MAC addresses that are edited before.

Manually enter the MAC address of wireless client.

After entering the client's MAC address, check the box of

the SSIDs desired to insert this MAC address into their

access control list.

s: Isolate the station from LAN - select to isolate the

wireless connection of the wireless client of the MAC

address from LAN.

Add a new MAC address into the list.

Delete the selected MAC address in the list.

Vigor2760 Series User's Guide