Draytek vigor2760 series User Manual page 619

[idx][ip address] [mask]
E x a m p l e
E x a m p l e
> wol fromWan on
> wol fromWan_Setting 1 192.168.1.45 255.255.255.0
>
any: It means any source IP address can pass through NAT
and wake up the LAN client.
This command will allow the user to choose whether WoL
packets can be passed from the Internet to the LAN network
from a specific WAN interface.
It means the index number (from 1 to 4).
These commands will allow the user to configure the LAN
clients that the user may wake up from the Internet through
the use of the WoL packet.
ip address - It means the WAN IP address.
mask - It means the mask of the IP address.
603 Vigor2760 Series User's Guide